1. Home
  2. Docs
  3. Flashstart
  4. Router Guides
  5. TP-Link

TP-Link

CONFIGURE THE FILTER ON TP-LINK DEVICES

You can activate the content filter on any TP-Link devices by following these steps:

If you haven’t registered yet, you can do it now for free here: Click here to register.
Connect to the dashboard by entering the IP address of your TP-Link in your browser. Then insert your credentials to log in.

First of all, you need to change the DNS of your device.
To do that, click on the [Network] menu and open the [WAN] submenu.
Click on [Advanced] to configure DNS used by TP-Link.
Type 185.236.104.104 in the Primary DNS field and 185.236.105.105 in the Secondary DNS field.



Now you need to configure the dynamic DNS service. To do that, open the [Dynamic DNS] menu and configure it as follow:

– Service Provider: Choose the Dyndns service. NB: you do not have to register for the dyndns service, it works anyway because the filter redirects the request to itself.
– Username: Type in the cloud content filter’s registration username.
– Password: Type in the cloud content filter’s password.
– Domain: Insert a domain name. you like. For example, domain.
– Check the box Enable DDNS.
Click on [Login] to force synchronization and then on [Save] to apply the changes.
NOTE: do not worry if the message DDNS not launching! pops up. Ignore it.



To enable and configure the DHCP server, open the [DHCP] menu and then click on [DHCP Settings].
Enable the service and configure it in the following way:

– Start IP Address: Type the first IP of the DHCP range.
– End IP Address: Type the last IP of the DHCP range.
– Address Lease Time: Choose the DHCP lease time (in seconds).
– Default Gateway: Insert the default gateway of your network.
– Default Domain: Insert the domain name, if any.
– Primary DNS: Filter’s primary DNS: 185.236.104.104
– Secondary DNS: Filter’s secondary DNS: 185.236.105.105
NB: If you have configured our DNS on TP-Link, you can type in the IP of device as the primary DNS.
– Finally, click on [Save] to apply the configuration.

Was this article helpful to you? Yes No

How can we help?