Kiwire 2.0 Documentation

  1. Home
  2. Docs
  3. Kiwire 2.0 Documentation
  4. Device & Controller Setup Guide
  5. Huawei AP5030DN Configuration for Kiwire

Huawei AP5030DN Configuration for Kiwire

A. Huawei AP5030DN Configuration
Step 1 – Configure user ACL settings.

  • Go to Configuration > Security > ACL > User ACL Settings
  • Create a new Destination with IP: 0.0.0.0/0
  • Set Wildcard to Kiwire IP address
  • Set Action to Permit
  • Set Protocol to TCP(6)


Step 2 – Modify RADIUS server profile.

  • Go to Configuration > Security > AAA > RADIUS > RADIUS Server Profile
  • Set Profile default key to same key with Kiwire NAS shared secret key
  • Confirm key entry on the menu and proceed
  • Set NAS IP address to the Access Point (AP) IP
  • Under “Server Settings” set IP Address to Kiwire IP address
  • Set Key to the same key with Kiwire NAS shared secret key
  • Confirm key entry on the menu and proceed
  • Place a checkmark on Authentication and set Port number to 1812
  • Place a checkmark on Accounting and set Port number to 1813


Step 3 – Modify authorization server.

  • Go to Configuration > Security > AAA > RADIUS >Authorization Server
  • Set Authorization server IP address to Kiwire IP address
  • Set Key to same key with Kiwire NAS shared secret key
  • Confirm key entry in the next input to proceed
  • Set Profile name to your desired RADIUS server profile


Step 4 – Modify authentication server.

  • Go to Configuration > Security > AAA > External Portal Server
  • Set Server IP to Kiwire IP
  • Set Shared key using the same key with Kiwire NAS shared secret key
  • Confirm shared key entry and proceed
  • Set URL to http://kiwire-ip/user/nas/huawei/
  • Place a checkmark on User access URL and set to user-url in the input box
  • Place a checkmark on User IP and set to user-ip in the input box
  • Place a checkmark on SSID and set to huawei-ssid in the input box
  • Place a checkmark on System name and set to huawei-sysname in the input box


Step 5 – Modify portal profile.

  • Go to Configuration > Security > AAA > Authentication Profile > Portal Profile
  • Set Portal Profile to Kiwire profile
  • Toggle Portal authentication radio options to select External portal server
  • Set Active server to Kiwire on the dropdown option


Step 6 – Modify RADIUS server profile.

  • Go to Configuration > Security > AAA > Authentication Profile > RADIUS Server Profile
  • Set RADIUS Server Profile to Kiwire profile


Step 7 – Modify authentication scheme.

  • Go to Configuration > Security > AAA > Authentication Profile > Authentication Profile
  • Set Authentication Scheme to radius on the dropdown option
  • Set First authentication to RADIUS authentication on the dropdown option


Step 8 – Configure authentication profile for WLAN

  • Go to Configuration > WLAN Service > WLAN Config > VAP Configuration > Authentication Profile
  • Set Authentication Profile to Kiwire profile


Step 9 – Configure portal profile for WLAN

  • Go to Configuration > WLAN Service > WLAN Config > VAP Configuration > Portal Profile
  • Set Portal Profile to Kiwire profile


Step 10 – Configure RADIUS server profile for WLAN

  • Go to Configuration > WLAN Service > WLAN Config > VAP Configuration > RADIUS Server Profile
  • Set RADIUS Server Profile to Kiwire profile


Step 11 – Configure authentication scheme for WLAN.

  • Go to Configuration > WLAN Service > WLAN Config > VAP Configuration > Authentication scheme
  • Set Authentication scheme to radius


B. Kiwire ConfigurationStep 1 – Add a new NAS.

  • Go to Device > NAS
  • Set Device Type to Huawei in the dropdown option
  • Set NAS Identifier to huawei in the input field
  • Set IP Address to the Access Point (AP) IP
  • Set Shared Secret Key to the same key as Huawei RADIUS profile
  • Set COA Port to 3799


Step 2 – Configuration is now complete

Was this article helpful to you? Yes No

How can we help?